If you own a LaTrax RC vehicle, you know the stock battery can make or break your weekend runs. In this post, we’ll cover everything you need to know about the LaTrax 7.2V 1200mAh NiMH battery pack, from raw specs to real-world performance—and even how to squeeze more runtime out with simple upgrades.
LaTrax 7.2V 1200mAh NiMH Battery Pack Specs & Overview
When shopping for a LaTrax 7.2V 1200mAh NiMH battery pack, it helps to start with the basics:
· Voltage & Capacity: 7.2 V nominal, 1200 mAh rating
· Connector Type: Standard Molex for easy swap-out
· Dimensions & Weight: Compact 95 × 34 × 13 mm; about 90 g
Why Choose the LaTrax 7.2V 1200mAh NiMH Battery Pack?
Even with emerging LiPo options, the LaTrax 7.2V 1200mAh NiMH battery pack remains a top pick for beginners thanks to:
· Robustness: Tolerant of casual charging habits
· Affordability: Lower upfront cost vs. high-end LiPo
· Plug-and-Play: No BMS or balance chargers required
LaTrax 7.2V 1200mAh NiMH Battery Pack Runtime Tests
We put the LaTrax 7.2V 1200mAh NiMH battery pack through three scenarios on a stock Rally car:
| Throttle Condition | Typical Runtime |
| Full Throttle | ~7 minutes |
| Mixed Throttle | ~12 minutes |
| Beginner Circuit | ~15 minutes |
LaTrax 7.2V 1200mAh NiMH Battery Pack at Full Throttle
Holding the trigger wide open pushes the pack’s discharge curve hard—expect around 7 minutes before voltage dips affect top speed.
LaTrax 7.2V 1200mAh NiMH Battery Pack in Mixed Use
Ease off the throttle and you’ll see the LaTrax 7.2V 1200mAh NiMH battery pack stretch to 12 minutes, perfect for casual backyard fun.
Charging Best Practices for LaTrax 7.2V 1200mAh NiMH Battery Pack
To protect your investment and maximize cycles:
- Use a delta-peak smart charger rated for 7.2 V NiMH packs
- Condition once every 10 cycles at 0.2 C to rebalance cells
- Store at 50% charge if you won’t run for more than two weeks
Upgrade Paths Beyond the LaTrax 7.2V 1200mAh NiMH Battery Pack
Want more juice? Swap in a 7.2V 1500mAh or 2000mAh NiMH mini-pack:
· Step 1: Match voltage and connector type
· Step 2: Secure wires with heat-shrink tubing
· Step 3: Verify fit within your LaTrax chassis
Custom Wiring for Higher-Capacity Packs
Higher-capacity packs often use thicker leads. A quick solder-and-shrink approach keeps everything snug and reduces voltage drop.
Conclusion
The LaTrax 7.2V 1200mAh NiMH battery pack delivers beginner-friendly reliability and a respectable 12-minute mixed-throttle runtime. When you’re ready for longer sessions, Himax’s custom 7.2 V NiMH upgrades provide a seamless path to extended fun—no exotic gear required.
